|
Linear
Recirculating
System
Description:
The
system operates as follows: Product to be
applied is metered into a batch tank system.
The mixed fluid is then pumped to a day
tank unit. The mixed fluid is then pumped
to tips mounted on a top and bottom manifold
within a negatively pressurized spray chamber
where the mixed fluid is applied to all
four sides of the lumber. Vapors created
in the spray chamber are removed by our
unique air knife suction system, which draws
the vapor through a mist elimination baffle
system, which turns the vapors into droplets
for reuse. All the excess fluid is then
returned from the chamber and mist eliminator
to the pump room where it is filtered through
a rotary separator unit. Once filtered the
clean liquid is returned back to the day
tank for reuse.
Features:
-
Air knife suction system
- Hinged
leak proof bulkhead door for easy spray
hoop access
- Removable
dual hoop manifold system c/w off set
tips
- Chromed
rolls (S.S.)
- Removable
perforated
S.S. debris screen
- Leak
proof hinged
cover for easy access to perforated screen
clean out
- Mist
eliminator/blower system (S.S.)
- UHMW
shaft seals for side removal of entire
rolls
- Rotary
filter unit
- Control
panel CSA (U.S.)
- All
stainless steel construction
- Optional
self cleaning tips
- Modular
design for easy installation. Includes
skid mounted pump station with control
panel, spray box and filtration module.
Drawings
Please
use the links below to view the following
drawings:
|
